RELAY BASE WEIDMULLER FLAT 5 PIN | TRZ 24VDC 1CO AGSNO
Terms and Conditions15-days money-back guarantee
TERMSERIES, Relay module, Number of contacts: 1, CO contact AgSnO, Rated control voltage: 24 V DC ±20 %, Continuous current: 6 A, Tension-clamp connection, Test button available: No
| Dimensions and weights | |
|
Depth |
87.8 mm |
|
Depth (inches) |
3.457 inch |
|
Height |
90.5 mm |
|
Height (inches) |
3.563 inch |
|
Width |
6.4 mm |
|
Width (inches) |
0.252 inch |
|
Net weight |
30.8 g |
|
Temperatures |
|
|
Storage temperature |
-40 °C...85 °C |
|
Ambient temperature |
-40 °C…60 °C |
|
Humidity |
5-95% relative humidity, Tu = 40°C, without condensation |
|
Environmental Product Compliance |
|
|
RoHS Compliance Status |
Compliant with exemption |
|
RoHS Exemption (if applicable/known) |
7a, 7cI |
|
REACH SVHC |
Lead 7439-92-1 |
|
SCIP |
9e2cbc49-76d9-4611-b8ec-5b4f549a0aa9 |
|
Rated data UL |
|
|
Ambient temperature (operational), max. |
60 °C |
|
Output current derating (ohmic) |
5 A @ 60 °C |
| 6 A @ 55 °C | |
|
Connection cross-section AWG, min. |
AWG 26 |
|
Connection cross-section AWG, max. |
AWG 14 |
|
Type of conductor |
rigid copper conductor |
| flexible copper conductor | |
|
Pollution severity level |
2 |
|
Control side |
|
|
Rated control voltage |
24 V DC ±20 % |
|
Rated current DC |
11.5 mA |
|
Power rating |
280 mW |
|
Status indicator |
Green LED |
|
Protective circuit |
Free-wheeling diode Reverse polarity protection
|
|
Coil
voltage of the replacement relay deviating from the rated control voltage
|
No
|
|
Coil voltage of the replacement relay |
24 V DC |
|
Load side |
|
|
Rated switching voltage |
250 V AC |
|
Continuous current |
6 A |
|
Max. switching frequency at rated load |
0.1 Hz |
|
Max. switching voltage, AC |
250 V |
|
Max. switching voltage, DC |
250 V |
|
Min. switching power |
100 mA @ 12 V |
|
Inrush current |
30 A / 20 ms |
|
AC switching capacity (resistive), max. |
1500 VA |
|
DC switching capacity (resistive), max. |
144 W @ 24 V |
|
Switch-on delay |
≤ 6 ms |
|
Switch-off delay |
≤ 16 ms |
|
Contact type |
1 CO contact (AgSnO) |
|
Mechanical service life |
5 x 106 switching cycles |
|
General data |
|
|
Operating altitude |
≤ 2000 m |
| above sea level | |
|
Mounting rail |
TS 35 |
|
Test button available |
No |
|
Mechanical switch position indicator |
No |
|
Colour |
black |
|
UL94 flammability rating component |
Component: Housing UL94 flammability rating: V-0 Component: Retaining clip UL94 flammability rating: V-0 |
|
Insulation coordination |
|
|
Rated voltage |
300 V |
|
Pollution severity |
2 |
|
Surge voltage category |
III |
|
Clearance and creepage distances for control side - load side |
≥ 6 mm |
|
Dielectric strength for control side - load side |
4 kVeff / 1 Min. |
|
Type of isolation at input and output |
reinforced insulation |
|
Dielectric strength of open contact |
1 kVeff / 1 min |
|
Dielectric strength to mounting rail |
4 kVeff / 1 Min. |
|
Impulse withstand voltage |
6 kV (1.2/50 µs) |
|
Protection degree |
IP20 |
|
Further details of approvals / standards |
|
|
Certificate No. (DNV) |
TAA00001E5 |
|
Certificate no. (cULus) |
E141197 |
|
Connection data |
|
|
Wire connection method |
Tension-clamp connection |
|
Stripping length, rated connection |
8 mm |
|
Clamping range, rated connection |
1.5 mm² |
|
Clamping range, min. |
0.14 mm² |
|
Clamping range, max. |
2.5 mm² |
|
Wire connection cross section AWG, min. |
AWG 26 |
|
Wire connection cross section AWG, max. |
AWG 14 |
|
Wire cross-section, solid, min. |
0.14 mm² |
|
Wire cross-section, solid, max. |
2.5 mm² |
|
Wire cross-section, solid, min. (AWG) |
AWG 26 |
|
Wire cross-section, solid, max. (AWG) |
AWG 14 |
|
Wire connection cross section, finely stranded, min. |
0.14 mm² |
|
Wire connection cross section, finely stranded, max. |
2.5 mm² |
|
Wire cross-section, finely stranded, min. (AWG) |
AWG 26 |
|
Wire cross-section, finely stranded, max. (AWG) |
AWG 14 |
|
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min. |
0.14 mm² |
|
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max. |
1.5 mm² |
|
Conductor cross-section, flexible, AEH (DIN 46228-1), min. |
0.14 mm² |
|
Conductor cross-section, flexible, AEH (DIN 46228-1), max. |
1.5 mm² |
|
Blade size |
0.6 x 3.5 mm |